Aqua-Flo XP2e 2.5 hp 1-spd (2x2")

Vervangingspomp voor diverse merken spa's.
€ 495,00
Type of Product: Water pump / Jet pump
Manufacturer: Aquaflo
Common Power Reference: 2.5 HP 1 speed
Power: Volts: Hz: Motor HP Low / High: 2.5Wet End Impellor HP: Amps Low / High Speed: 10.3RPM Low / High: 2840Capacitor:
Plumbing Connections: 2 x 2 inch Waterway/Aquaflo unions
Electrical Connections: Comes without cord. 3 pin cord can be ordered separately or you can use your old cable.
Dimensions: Length: 379 mm Height: 232 mmDepth: 202 mm
Commonly Used With : This pump can be used on a variety of Spas.
Additional Notes:

This pump can be found in many different Hot Tubs in various forms. It has 2 inch outlets and will work in place of Waterway, GE, Emerson, A.O Smith and in most cases the unions will wind straight on.

You may find that your pump has a smooth body as opposed to this style of the pump but as long as the ratings are the same it will still work. In most cases, you will find that the wet end is the same but the motor may be made by a different company.

You maybe finding it difficult to find an exact match for your current pump. If you need our help then just give us a call or email and we will happily advise if this pump can be adapted to work with your system. Our range of pumps we offer is designed to get over most obstacles.

Comes with 2 x 2" unions.

Type of Product: Water pump / Jet pump
Manufacturer: Aquaflo
Common Power Reference: 2.5 HP 1 speed
Power: Volts: Hz: Motor HP Low / High: 2.5Wet End Impellor HP: Amps Low / High Speed: 10.3RPM Low / High: 2840Capacitor:
Plumbing Connections: 2 x 2 inch Waterway/Aquaflo unions
Electrical Connections: Comes without cord. 3 pin cord can be ordered separately or you can use your old cable.
Dimensions: Length: 379 mm Height: 232 mmDepth: 202 mm
Commonly Used With : This pump can be used on a variety of Spas.
Additional Notes:

This pump can be found in many different Hot Tubs in various forms. It has 2 inch outlets and will work in place of Waterway, GE, Emerson, A.O Smith and in most cases the unions will wind straight on.

You may find that your pump has a smooth body as opposed to this style of the pump but as long as the ratings are the same it will still work. In most cases, you will find that the wet end is the same but the motor may be made by a different company.

You maybe finding it difficult to find an exact match for your current pump. If you need our help then just give us a call or email and we will happily advise if this pump can be adapted to work with your system. Our range of pumps we offer is designed to get over most obstacles.

Comes with 2 x 2" unions.

Schrijf uw eigen beoordeling
  • Alleen geregistreerde gebruikers kunnen een beoordeling schrijven
  • Slecht
  • Uitstekend