Aqua-Flo XP2e 2hp 2-spd (2x2")

Vervangingspomp voor diverse merken spa's.
€ 445,00
Type of Product: Water pump / Jet pump
Manufacturer: Aquaflo
Common Power Reference: 2.0 HP 2 speed
Power: Volts: Hz: Motor HP Low / High: 2.0Wet End Impellor HP: Amps Low / High Speed: 1.8 / 9RPM Low / High: 1450 / 2850Capacitor:
Plumbing Connections: 2 x 2 inch Waterway/Aquaflo unions
Electrical Connections: 1 x 4 core JJ lead
Dimensions: Length: 379 mm Height: 230 mmDepth: 203 mm
Commonly Used With : This pump can be used in a variety of spas.
Additional Notes:

This pump can be found in many different Hot Tubs in various forms. It has 2-inch outlets and will work in place of Waterway, Vico, Sta-Rite, GE, Emerson, A.O Smith and in most cases the unions will wind straight on. This pump is used to run low speed for heating and high speed for the boost operation.

You may find that your pump has a smooth body as opposed to this style of the pump but as long as the ratings are the same it will still work. In most cases, you will find that the wet end is the same but the motor may be made by a different company.

You maybe finding it difficult to find an exact match for your current pump. If you need our help then just give us a call or email and we will happily advise if this pump can be adapted to work with your system. Our range of pumps we offer is designed to get over most obstacles.

Unions to be purchased separately

Can be used as well as replacement of Gecko 06620079-1040 : PUMP XP2 R0 3.6MBHP 220V 50HZ 2SPD S/C.

Hotspring Watkins 2hp 2 speed pump

  (2 speed) 

Replacement for MANY different models of Hotspring.

2speed 2hp with 2" suction and 2" discharge.

Type of Product: Water pump / Jet pump
Manufacturer: Aquaflo
Common Power Reference: 2.0 HP 2 speed
Power: Volts: Hz: Motor HP Low / High: 2.0Wet End Impellor HP: Amps Low / High Speed: 1.8 / 9RPM Low / High: 1450 / 2850Capacitor:
Plumbing Connections: 2 x 2 inch Waterway/Aquaflo unions
Electrical Connections: 1 x 4 core JJ lead
Dimensions: Length: 379 mm Height: 230 mmDepth: 203 mm
Commonly Used With : This pump can be used in a variety of spas.
Additional Notes:

This pump can be found in many different Hot Tubs in various forms. It has 2-inch outlets and will work in place of Waterway, Vico, Sta-Rite, GE, Emerson, A.O Smith and in most cases the unions will wind straight on. This pump is used to run low speed for heating and high speed for the boost operation.

You may find that your pump has a smooth body as opposed to this style of the pump but as long as the ratings are the same it will still work. In most cases, you will find that the wet end is the same but the motor may be made by a different company.

You maybe finding it difficult to find an exact match for your current pump. If you need our help then just give us a call or email and we will happily advise if this pump can be adapted to work with your system. Our range of pumps we offer is designed to get over most obstacles.

Unions to be purchased separately

Can be used as well as replacement of Gecko 06620079-1040 : PUMP XP2 R0 3.6MBHP 220V 50HZ 2SPD S/C.

Hotspring Watkins 2hp 2 speed pump

  (2 speed) 

Replacement for MANY different models of Hotspring.

2speed 2hp with 2" suction and 2" discharge.

Schrijf uw eigen beoordeling
  • Alleen geregistreerde gebruikers kunnen een beoordeling schrijven
  • Slecht
  • Uitstekend